The recovery source is usually a location used to update advanced Windows features, enable various Windows features, or restore a corrupted Windows image. You can also use Windows Update or a range of files as a restore source.

A recovery source is a location used specifically to restore additional Windows benefits, enable additional Windows features, or overhaul a corrupted Windows image. You can use Windows Update or a set of files as repair credit.

A restore reason is a location that helps restore additional Windows features, enable additional Windows features, or repair a corrupted Windows image. You can use Windows Update or a number of documents as a recovery source.

A recovery source is a place where you can restore additional Windows conditions, enable advanced Windows features, or save a corrupted Windows image.

You can use Windows Update or set behind files as a restore source.

Select The Appropriate Recovery Source

Windows Update is the default restore source, but you have the option to configure Group Policy to install it, and there may be more network locations that require our files to restore a healthy or broken Windows feature. Restore a working system.

Use Windows Update To Restore Optional But Functional Windows Images

1. Windows Update was used by default if allowed by computer policy settings.

2. You can set Windows Update as the backup restore source. If you’re using Windows Update as your primary backup or restore source, it’s important to make sure your firewall is set to allow access to Windows Update.

Use Files As Good Sources

Instead of testing Windows Update, you can use the target group as a source:

Mounted Image

You can choose a Windows image mounted from this simple .wim file as a source for restoring advanced features and restoring even the most damaged operating system. Example: c:\mount\Windows. For more information about capturing a meaningful Windows image as WIM information, see Capturing Disk Partition Images Using DISM.

Installing Windows

If you wish, you can use a running Windows installation exactly as a source for restoring additional consumables, providing a fully sharedAccess the c:\Windows folder on your network.

Folders side by side (SxS)

How do I repair Windows 10 with command prompt?

Click Startup Repair.
Click System Restore.
Choose a trusted username.
Enter password.
Type “cmd” into the main search field.
Right-click Command Prompt and select “Run as administrator”.
At the command prompt, type sfc /scannow and press Enter.

You can use a side-by-side Windows file from a network share or removable media such as Windows installation media as a file source. Example: z:\sources\SxS.

WIM file

Of course, you can use a Windows demo (.file wim) on a network share as a source to restore additional features. You must specify an index in the Windows image in all the .wim files you need, and use the Wim: prefix in the path to recognize this file format. For illustration, specify index 3 in the registry named contoso.wim, enter: Wim:\\network\images\contoso.wim:3.

Use Group Policy Set To Preferred Recovery Source

You can use Group Policy to change your preferred restore source.

Configure Group Policy For Features On Demand

1. Open the dialing policy editor. For example, on S.K. a. On Windows 10, on the Start screen, type “Edit Group Policy”, then select “Edit Group Policy”Click to open the Group Policy Editor.

2. Click “Computer Configuration”, “Administrative Templates”, “And System” and then double-click “Set Advanced Feature Options” in the Install and Repair Features settings.

3. Select the display options you want to use for on-demand features.

Maintain Source Of Repair

If you’re not using Windows Update for your recovery source features, and for automatic corruption repair, consider the following guidelines for managing your recovery source.

Technical Updates

Update all repair sources with the latest maintenance updates. If you are using a WIM image or feature file, you may need DISM to serve the image. For more information, see Mount and Modify a Windows Image Using DISM. If you are using an online install of Windows that is shared locally on your network due to a recovery image, make sure your computer hasYou have access to Windows Update.

Multilingual Images

You must include all relevant language packs in your current recovery source files in order to support your image. If you enable Full Repair for a feature without the language components currently required by Windows Setup for that feature, the installation will fail.

You can download additional language packs after restoring performance.

3 minutes of reading

Use only RTM media, regardless of whether the source is WIM or a specific mounted Windows image. Update information contains older versions of files that exclude certain media, and these files may be needed by the system running the target.

Of course, make sure the source of this latest cumulative update is fixed. Assuming the target operating system is patched to a higher level than the original, adding features orRestoring operating systems may fail because the target operating system requires updated files that are not present in the source.

If you use the dism /RestoreHealth command, you can specify one of these locations using the /Source parameter. For more information, see DISM operating system command-line options.

Recommended By Our Editors

Do you like what you read?

Subscribe to our tips and tricks newsletter for expert advice on how to get the most out of your technology.

This newsletter may contain advertising, store links or affiliate links. By subscribing to the latest newsletter, you agree to many of our terms of use and privacy policies. You can unsubscribe from messages at any time.

Windows Safe Mode is an indispensable tool. On a pcrrr infected with malware or faulty drivers, safe mode may be the only way to sourceeer.com it.Computer process start.

Safe boot mode for your PC with a minimum number of car owners and services. No third party software loads drivers either, and even heavily integrated Windows components are limited to what is needed. Safe Mode is a great way to remove problematic software, such as malware, without it bothering you. In addition, it provides a very convenient environment where it is easier to roll back drivers and use dedicated troubleshooting tools.

If safe mode can help

When Windows starts normally, it launches startup programs, starts any services configured to start, and loads any hardware you’ve installed. If you’re booting into Windows Safe Mode, use a very low screen resolution with simple video drivers, don’t support many features, download only necessary products and services, and avoid downloading third-party launchers.

Sometimes you can start Windows insafe mode if you can’t continue working with Windows normally, so now is the time to start troubleshooting potential problems. If our computer is also infected with malware, the hardware has unstable drivers that affect the occurrence of blue screens, safe mode can help you solve the problem, since these parts will not load as they would during normal Windows startup.

RELATED: Everything you need to know about the blue screen of death

If your computer has an error and users can’t fix it, or if your work computer is unstable and freezes or blue screens, you should enter Safe Mode to fix it.

How to Start Windows in Safe Mode

RELATED ARTICLES: How to Boot into Safe Mode in Windows 10 or 8 (Easy Method)

Your Windows PC should automatically boot into Safe Mode if your PC freezes repeatedly while having problems booting normally. However, you can also manually boot into safe mode:

Windows 7 and earlier: Press the F8 key during computer startup (after the initial BIOS screen, but before the Windows boot screen), then select Safe Mode from the menu that appears.

Windows 8: Hold down the Shift key while clicking Restart from the Power menu on the login screen or the exact menu on the charms bar to start someone else’s process.

Windows Shift 10: Hold down the Restart button in the Power Options submenu of each Start menu. Click Troubleshoot > Advanced Options > Startup Options > Restart. When you actually see the main screen, press the 4 key.